Brightinwd UV Light Sanitizer

Brightinwd ultraviolet light is a powerful disinfection lamp that uses highly advanced Ozone and UV light to kill the germs and viruses for your places. It uses the 110V, and 36W UV LED bulb with a 15 seconds delay timing for outstanding performanceto ensure safe use. Besides, it comes with exclusive remote control of up to 20 meters and has 3-gear ultimate timing function that includes 15/30/60 minutes for maximum control.

It is suitable for room area about 40㎡, which is ideal for the living room, bedrooms, storage, bathroom, and any other section of your place where you need sanitization.

Brightinwd UVC Disinfection Lamp Key Feature

• Double Ozone and UVC technology for disinfection
• Made of quartz material with long service life, high transmission rate and better sterilization effect
• Uses the 110V and 36W UV LED bulb
• 15 seconds delay to start, to ensure people leave safely
• Exclusive remote control of up to 20 meters
• 3-gear ultimate timing function for different spaces
• Cover a large area of up to 40 sq meters

Brightinwd Ultraviolet Light Specs

Brand: Brightinwd
Type: UV germicidal lamp
Material: ABS environmental protection plastic material
Tube material: quartz ultraviolet tube
Power voltage: 110V
Power watt: 36w
Coverage area: about 40sqm
Wavelength: 254nm

Control method: Panel button / wireless remote control
Timing level: 3 levels (15min/30min/60min)
Remote control: 20m remote control, 30s delayed start
Size: 18.42 x 10.43 x 5.87 inches
Weight: 2.75 KG
Occasions: bedroom, kitchen, washroom, pet house, toilet, school, hotel, cars etc
Package:
— 1* 36W UVC & Ozone bulb
— 1* Sturdy lamp base with 5 ft cord
— 1* Remote controller

How to use the UV germicidal lamp?

1. Start the UVC lamp.
   Plug the germicidal lamp in socket then press the power button. When the power is turned on, the lamp will ring, then “15 minutes” indicator light start flashing.

2. Disinfecting time setting.
   Set it via Remote Control: press “15”/ “30”/”60″ button for set the time you want to disinfect, then the corresponding indicator lights flashing on the base.
   Set it via Base: press the “set” button to set the desired time.
3. Start sterilizing
   Press the “ON” button of the Remote Control or the power key on the base panel to start disinfection process, then there are 30 seconds of the alarm sound for opening the lamp, please leave the space within 30s.
4. Stop disinfection
   When the setting time is over, the lamp will automatically stop.
5. Attention
   (1) This product will produce high intensity ultraviolet light, please avoid radiation damage to skin and eyes.
   (2) Please do not direct exposure to animals and plants, valuables should be protected by shading.
   (3) After disinfection, keep ventilation for 30-90 minutes in order to disperse the gas produced in the process of work.